You're currently on:
Product Description
Lodar Wireless Remote control.
Professional, high end wireless remote.
The Lodar mission is to provide high quality Industrial Range of Radio Wireless Solutions for Commercial Vehicle Winches as well as other Industrial applications at competitive prices.
The Lodar Industrial Radio Wireless Remote Controls do exactly as described. By using the Remote Radio Wireless Transmitter they will allow Winch systems, or any other Industrial and commercial application, to be controlled remotely up to 200 ft / 60M away (9000 series).
The receiver would be mounted near the Winch and receive signals from the Radio Wireless Transmitter handset, therefore operating the solenoids or valves – straight away. This enables you to stand clear while winching or for recovery vehicles, even sit in the breakdown vehicles and steer onto the recovery truck while operating the winch safely.
The Lodar wireless receiver can be mounted pratically anywhere on the vehicle as there are no external aerials to worry about which means that any extra wiring is unnecessary.
There are just four wires to connect the 2 Function Receiver, earth, supply, and solenoid in and solenoid out which makes connecting the Lodar very simple. This particular Lodar is configured to work with both 12 and 24 volt supplies. The Transmitter has an internal aerial, with large buttons that are easy to operate as well as Reset and Stop buttons all combined on within a durable, rubber encased handset.
Safety is an important element in the design of the new Lodar 9000. ALL models have an Electronic Stop System (ESS), with the Reset now being controlled from the Transmitter. The Receiver no longer has relays but solid state switching, overcoming the potential problem of sticking relays and allowing close control of the current to prevent burnt tracks in the event of overload.
The whole range of Lodar wireless remotes are available, call or email our sales office for details should you require a multi-function handset.
Tel: 01274 680744, sales@autoliftuk.com
Additional Information
| Part Number | LOD00001 |
| Type of Control | Wireless Control |
Recently Viewed Products
My Cart
You have no items in your shopping cart.
Compare Products - 53 Items
-
Kingone ATV GP4000 12v
-
Kingone TDS 9.5i 12v
-
Kingone ATV GP3000 12V
-
Kingone TDS 12.0c 12v
-
Kingone TDS 12.0i 12v
-
Kingone TDS 9.5c 12v
-
Champion Solenoid Box Extension Socket
-
2m X 60mm X14t Tree Strop
-
3m X 60mm X14t Tree Strop
-
4m X 60mm X14t Tree Strop
-
2m x 60mm Strop with Hook and Masterlink
-
8t x 50mm X 10m Nylon Winch Extension Rope
-
4t Swingaway Pulley Block
-
8t Swingaway Pulley Block
-
8t Swingaway Pulley Block with Grease Nipples
-
Winch Mounting Plate up to 15000lb Winches
-
3 x 1.5m Solenoid Extension Leads
-
Battery Isolation Switch
-
12v Solenoid Block
-
24v Solenoid Block
-
Cable Tensioner
-
4t x 4.5 Inch Pulley Block
-
9t x 8 Inch Pulley Block
-
20000lb Winch Mounting Plate
-
Roller Fairlead 2500 to 3500lb Winch
-
Champion Hand Held Wired Remote with Stop Button
-
Portable Box Section Winch Mount
-
Mushroom Emergency Stop Button
-
Heavy Duty 12v Wireless Control
-
Heavy Duty 24v Wireless Control
-
5t x 50mm x 20m Nylon Winch Extension Rope
-
Winch Mounting Plate for Champion 9500 Short Drum
-
24v Solenoid - Up to 4500lb Winches
-
Air/Manual Clutch for TDS Winches
-
Landrover Defender (A/C and non A/C) Winch Bumper
-
Standard Hook
-
Corded Handheld Remote
-
Bow Shackle
-
Gloves
-
Landrover Discovery 2 Premium Winch Bumper
-
Roller fairlead for 5320PRO, 5322PRO, 5330PRO & 5332PRO
-
Landrover Defender (Aircon) Winch Bumper
-
Range Rover Classic Winch Bumper
-
Landrover Defender Winch Bumper
-
Landrover Discovery 1 300 Series Winch Bumper
-
Jeep Wrangler Tubular A-Bar Winch Bumper
-
Landrover Discovery 1 Tubular A-Bar Winch Bumper
-
landrover Defender (Non A/C) Tubular Winch Bumper
-
Landrover Discovery 1 Tubular Winch Bumper
-
Bak Rak - Small Towbar Mount
-
Bak Rak - Large Towbar Mount
-
4.75t Blue Pin Tested Shackle
-
Lodar 12/24v 2 Function Wireless Control and Receiver

