Winch Mounting Plate up to 15000lb Winches

The mounting holes for the winch (hole centres 254mm x 114mm) are on pressed, raised sections of the plate so that the winch mounting bolt heads are flush with the underside of the plate so it can easily be bolted or welded down to a flat surface.  This pattern is the same used by CTA, Champion, King One, Superwinch, Warn Wiches etc.

There is a return fold on the front leading edge of the plate which is drilled and slotted to mount the fairlead to along with pre-drilled holes in the plate to feed battery or solenoid winch cables through.  This is designed to suit a fairlead with 255ml hole centres.

The plate is powder-coated in dark grey for weather protection.

Dimensions: 600mm x 210mm x 80mm